
“Weighing of important qualities is considered in the selecting perfect material to use in producing products like stainless steel bars, medical bars, etc.”
As we all know, stainless steels are manufacturing materials that have good strength, is corrosion-resistant, and is fabrication resistant. These materials can always meet a vast range of design standards and this includes service life, load, and low maintenance. Thus, choosing or selecting the right stainless steel types and grades needs thorough weighing of four qualities in important order:
- Heat or Corrosion Resistance
-
-
- This is the basic reason to consider specifying stainless steel products. There is a need to have knowledge about the nature of the stainless steel environment and the level of required resistance to heat or corrosion of every stainless steel material.
-
- Mechanical Properties
-
-
- The basis for steel selection is the combination of strength and corrosion resistance. This quality involves particularly elevated or low temperature and strength at room.
-
- Manufacturing Operations
-
-
- This focuses on the operations on how the product will be made like the following examples: machining, grinding, welding, chamfering, forging, stamping, roll forming, four-slide operations. The quality of a certain steel product really depends on the specific processes that the steel materials undergo to reach hardness, accuracy, and perfect roundness. Among the most sought mechanical operations now is the centerless grinding that is proven to produce accurate roundness.
-
- Whole Cost
-
- Considering the expenses of production and material as well as the increased savings of product with durability but maintenance-free.
- Required Strength
-
-
- Austenitic, martensitic, duplex and PH steels can obtain higher strengths. Strengths may differ according to the series of processes the materials undergo. For example, forming and welding processes oftentimes influence what material and grade should be the most suitable.
-
- Operation’s Temperature
-
-
- Corrosion rates are usually accelerated by high temperatures. Thus, it signifies a higher grade. Well, mostly low temperatures require hard austenitic steel.
-
- Required Product Form
-
- Not all grades can be obtainable in all product sizes and forms like sheets, tubes, and bars. Moreover, austenitic steels can offer a wide range of dimensions that all product forms can be formed out from it. So mostly stainless steel bars are created from an austenitic type of stainless steel.